Artful Soul Logo Finding Your Ring Size
at The Artful Soul®



Set your printer to 100% page size in the page setup area (usually found in the popup box after you click on print) and print this page. Verify that you have the correct printed size by measuring with a ruler between A and B, it should be 3-1/2 inches long.

  1. Cut out the ring sizer. Note that the outlines in black are for wider ring bands, which generally require a larger size, but use the inner gray lines if you are measuring for a narrow ring band.
  2. Cut a slit where marked
  3. With the numbers facing out, wrap the sizer around the finger where the ring will be worn.
  4. Pull the pointed end B through Slit A until the sizer is snug.
  5. The number aligned at the Slit is your size.
  6. Slip the sizer over your knuckle, make sure it is not too tight, or loosen to fit and re-check your size.
  7. If the measure lands between numbers your size is a half or quarter size, depending on distance...between 7 and 8 could be 7.25, 7.50, or 7.75.

Note that your finger size may change a bit from morning to night (smaller in the morning, larger at night after a full day of movement). Finger size can also vary by season, smaller in cold winter and larger in humid summer! If the ring you want is not available in your exact size, it is generally recommended that you select the next largest size.

These are just guidelines...if you have a ring already that fits perfectly, that is always the best size to go with!

All images, text, code and logo on this website are the property of The Artful Soul, and cannot be copied or used without our express written permission